Display, keypad, or selection problem
Automatic Products LCM1 LCM2 Snackshop
Machine type unverifiedLow confidenceExact parts not verified
Back to all issues
Display, keypad, or selection problem
This initial diagnostic sequence guides the operator through basic operational checks to determine the general area of concern within the machine's functionality.
Low VoltageOperator10-18 min
Display / keypad10 stepsoperator-intermediate
- For any checks involving electrical connections, motor testing, or internal wiring, please contact a qualified technician immediately.
- If the issue requires checking voltage levels or internal circuitry, only a qualified technician should perform these diagnostics.
- If the motor or associated electrical components need inspection, a qualified technician must handle the service to ensure safety.
- If the issue involves the main power supply or internal wiring, a qualified technician is required for safe assessment and repair.
Checklist
Guided Diagnostic Steps
Work from low-risk checks toward technician-level inspection only when evidence supports it.
Printable checklist
You can read or print the route now. The first checkbox click opens the service contact gate.
- 1
Open the cabinet door and press the red Mode Switch once. Confirm the...
operator-intermediatemediumOpen the cabinet door and press the red Mode Switch once. Confirm the display changes to Service Mode (Accountability/Setup).
Stop conditions- For any checks involving electrical connections, motor testing, or internal wiring, please contact a qualified technician immediately.
- If the issue requires checking voltage levels or internal circuitry, only a qualified technician should perform these diagnostics.
- If the motor or associated electrical components need inspection, a qualified technician must handle the service to ensure safety.
- If the issue involves the main power supply or internal wiring, a qualified technician is required for safe assessment and repair.
- If the motor or its internal gearing/switch has failed, replacement must be performed by a qualified technician.
- If the diagnosis requires checking voltage levels or internal circuitry, a qualified technician must perform the service.
Expected: Initial condition is documented before deeper diagnosis.
Evidence to note: note
- 2
Press Button [1] on the keypad. Test the coin mechanism by pressing [...
operator-intermediatemediumPress Button [1] on the keypad. Test the coin mechanism by pressing [A] for Quarter, [B] for Nickel, [C] for Dime, and [D] for Dollar. Does coin dispensing occur?
Stop conditions- For any checks involving electrical connections, motor testing, or internal wiring, please contact a qualified technician immediately.
- If the issue requires checking voltage levels or internal circuitry, only a qualified technician should perform these diagnostics.
- If the motor or associated electrical components need inspection, a qualified technician must handle the service to ensure safety.
- If the issue involves the main power supply or internal wiring, a qualified technician is required for safe assessment and repair.
- If the motor or its internal gearing/switch has failed, replacement must be performed by a qualified technician.
- If the diagnosis requires checking voltage levels or internal circuitry, a qualified technician must perform the service.
Expected: Initial condition is documented before deeper diagnosis.
Evidence to note: note
- 3
Open the cabinet door and press the red Mode Switch once. Confirm the...
operator-intermediatemediumOpen the cabinet door and press the red Mode Switch once. Confirm the display changes to Service Mode (Accountability/Setup).
Stop conditions- For any checks involving electrical connections, motor testing, or internal wiring, please contact a qualified technician immediately.
- If the issue requires checking voltage levels or internal circuitry, only a qualified technician should perform these diagnostics.
- If the motor or associated electrical components need inspection, a qualified technician must handle the service to ensure safety.
- If the issue involves the main power supply or internal wiring, a qualified technician is required for safe assessment and repair.
- If the motor or its internal gearing/switch has failed, replacement must be performed by a qualified technician.
- If the diagnosis requires checking voltage levels or internal circuitry, a qualified technician must perform the service.
Expected: Result is documented before continuing the route.
Evidence to note: note
- 4
Press Button [1] on the keypad
operator-intermediatemediumPress Button [1] on the keypad
Stop conditions- For any checks involving electrical connections, motor testing, or internal wiring, please contact a qualified technician immediately.
- If the issue requires checking voltage levels or internal circuitry, only a qualified technician should perform these diagnostics.
- If the motor or associated electrical components need inspection, a qualified technician must handle the service to ensure safety.
- If the issue involves the main power supply or internal wiring, a qualified technician is required for safe assessment and repair.
- If the motor or its internal gearing/switch has failed, replacement must be performed by a qualified technician.
- If the diagnosis requires checking voltage levels or internal circuitry, a qualified technician must perform the service.
Expected: Result is documented before continuing the route.
Evidence to note: note
- 5
Test the coin mechanism by pressing [A] for Quarter, [B] for Nickel,...
operator-intermediatemediumTest the coin mechanism by pressing [A] for Quarter, [B] for Nickel, [C] for Dime, and [D] for Dollar
Stop conditions- For any checks involving electrical connections, motor testing, or internal wiring, please contact a qualified technician immediately.
- If the issue requires checking voltage levels or internal circuitry, only a qualified technician should perform these diagnostics.
- If the motor or associated electrical components need inspection, a qualified technician must handle the service to ensure safety.
- If the issue involves the main power supply or internal wiring, a qualified technician is required for safe assessment and repair.
- If the motor or its internal gearing/switch has failed, replacement must be performed by a qualified technician.
- If the diagnosis requires checking voltage levels or internal circuitry, a qualified technician must perform the service.
Expected: Result is documented before continuing the route.
Evidence to note: note
- 6
Does coin dispensing occur
operator-intermediatemediumDoes coin dispensing occur
Stop conditions- For any checks involving electrical connections, motor testing, or internal wiring, please contact a qualified technician immediately.
- If the issue requires checking voltage levels or internal circuitry, only a qualified technician should perform these diagnostics.
- If the motor or associated electrical components need inspection, a qualified technician must handle the service to ensure safety.
- If the issue involves the main power supply or internal wiring, a qualified technician is required for safe assessment and repair.
- If the motor or its internal gearing/switch has failed, replacement must be performed by a qualified technician.
- If the diagnosis requires checking voltage levels or internal circuitry, a qualified technician must perform the service.
Expected: Result is documented before continuing the route.
Evidence to note: note
- 7
Enter the Motor Test selection
operator-intermediatemediumEnter the Motor Test selection
Stop conditions- For any checks involving electrical connections, motor testing, or internal wiring, please contact a qualified technician immediately.
- If the issue requires checking voltage levels or internal circuitry, only a qualified technician should perform these diagnostics.
- If the motor or associated electrical components need inspection, a qualified technician must handle the service to ensure safety.
- If the issue involves the main power supply or internal wiring, a qualified technician is required for safe assessment and repair.
- If the motor or its internal gearing/switch has failed, replacement must be performed by a qualified technician.
- If the diagnosis requires checking voltage levels or internal circuitry, a qualified technician must perform the service.
Expected: Result is documented before continuing the route.
Evidence to note: note
- 8
Select a specific motor (e
operator-intermediatemediumSelect a specific motor (e
Stop conditions- For any checks involving electrical connections, motor testing, or internal wiring, please contact a qualified technician immediately.
- If the issue requires checking voltage levels or internal circuitry, only a qualified technician should perform these diagnostics.
- If the motor or associated electrical components need inspection, a qualified technician must handle the service to ensure safety.
- If the issue involves the main power supply or internal wiring, a qualified technician is required for safe assessment and repair.
- If the motor or its internal gearing/switch has failed, replacement must be performed by a qualified technician.
- If the diagnosis requires checking voltage levels or internal circuitry, a qualified technician must perform the service.
Expected: Result is documented before continuing the route.
Evidence to note: note
- 9
g
operator-intermediatemediumg
Stop conditions- For any checks involving electrical connections, motor testing, or internal wiring, please contact a qualified technician immediately.
- If the issue requires checking voltage levels or internal circuitry, only a qualified technician should perform these diagnostics.
- If the motor or associated electrical components need inspection, a qualified technician must handle the service to ensure safety.
- If the issue involves the main power supply or internal wiring, a qualified technician is required for safe assessment and repair.
- If the motor or its internal gearing/switch has failed, replacement must be performed by a qualified technician.
- If the diagnosis requires checking voltage levels or internal circuitry, a qualified technician must perform the service.
Expected: Result is documented before continuing the route.
Evidence to note: note
- 10
, 110) to initiate a test rotation
operator-intermediatemedium, 110) to initiate a test rotation
Stop conditions- For any checks involving electrical connections, motor testing, or internal wiring, please contact a qualified technician immediately.
- If the issue requires checking voltage levels or internal circuitry, only a qualified technician should perform these diagnostics.
- If the motor or associated electrical components need inspection, a qualified technician must handle the service to ensure safety.
- If the issue involves the main power supply or internal wiring, a qualified technician is required for safe assessment and repair.
- If the motor or its internal gearing/switch has failed, replacement must be performed by a qualified technician.
- If the diagnosis requires checking voltage levels or internal circuitry, a qualified technician must perform the service.
Expected: Result is documented before continuing the route.
Evidence to note: note
Tools for this route
No special tools listed
Parts status
Exact public parts list not verified yet. Use this route to identify the system before ordering.
Candidate areas for part verification
Display and keypad partsDelivery ComponentsElectronics & InterfaceValidation SystemsPayment componentsVend path components
Other Possible Issues
Switch routes if this symptom is not the closest match.