Skip to main content
Rocky Mountain Vending

Commodity Auger Mechanical Check

Automatic Products RMi 2000

Cold DrinkHigh confidenceExact parts not verified
Back to all issues

Commodity Auger Mechanical Check

Ensuring dry product canisters dispense correctly without mechanical failure.

Low RiskOperator5-10 min
Vend path4 stepsoperator-intermediate
  • If any mechanical issue requires disassembly beyond basic clearance, a qualified technician should be consulted.

Checklist

Guided Diagnostic Steps

Work from low-risk checks toward technician-level inspection only when evidence supports it.

Printable checklist

You can read or print the route now. The first checkbox click opens the service contact gate.

lead gated
  1. 1

    Verify the canister is not empty before testing.

    operator-intermediatelow

    Verify the canister is not empty before testing.

    Stop conditions
    • If any mechanical issue requires disassembly beyond basic clearance, a qualified technician should be consulted.

    Expected: Initial condition is documented before deeper diagnosis.

    Evidence to note: note

  2. 2

    Ensure the auger drive mechanism engages securely with the motor pin.

    operator-intermediatelow

    Ensure the auger drive mechanism engages securely with the motor pin.

    Stop conditions
    • If any mechanical issue requires disassembly beyond basic clearance, a qualified technician should be consulted.

    Expected: Initial condition is documented before deeper diagnosis.

    Evidence to note: note

  3. 3

    Inspect for product clumping in the auger flights and spout.

    operator-intermediatelow

    Inspect for product clumping in the auger flights and spout.

    Stop conditions
    • If any mechanical issue requires disassembly beyond basic clearance, a qualified technician should be consulted.

    Expected: Result is documented before continuing the route.

    Evidence to note: note

  4. 4

    Clear any blockage by removing clumped product and drying the compone...

    operator-intermediatelow

    Clear any blockage by removing clumped product and drying the components.

    Stop conditions
    • If any mechanical issue requires disassembly beyond basic clearance, a qualified technician should be consulted.

    Expected: Result is documented before continuing the route.

    Evidence to note: note

Tools for this route

No special tools listed

Location Help

Where to find this

Use this as orientation before touching the machine. It is location help, not a repair instruction.

Product Canisters and Auger System

Locate the Product Canisters and Auger System; use visual clues and safe exterior access before moving to deeper inspection.

  • Stores dry commodities (coffee, sugar, chocolate, etc.) and accurately dispenses them via auger agitation.
  • Stackable product canisters
  • Auger drive mechanisms
  • Humidity bars
cabinet drink

Parts status

Exact public parts list not verified yet. Use this route to identify the system before ordering.

Candidate areas for part verification

Vend path componentsCabinet HardwareHot Water System ComponentsCanisters and AugersBrewer MechanicalsWater system components

Other Possible Issues

Switch routes if this symptom is not the closest match.

All issues
Water / fittingsHot Water System Overflow DiagnosticsCoolingCooling or refrigeration problemDoor / lockDoor, latch, or lock problemPaymentsPayment or money acceptance problemPowerNo power or dead display