Payment Device Has No Power
Crane WD157016
Payment Device Has No Power
Basic checks to determine why the payment device appears unpowered.
Qualified technician handoff: stop before live electrical testing, sealed-system refrigeration work, compressor service, or protected-compartment access unless a qualified technician is handling the work.
- Burning smell from payment device or harness: stop
Checklist
Guided Diagnostic Steps
Work from low-risk checks toward technician-level inspection only when evidence supports it.
You can read or print the route now. The first checkbox click opens the service contact gate.
- 1
Verify Power at Controller
technician-advancedlive-voltageThis step requires live-voltage measurement at the controller power input. If you are not trained for live-voltage work, hand off now. With appropriate PPE and tools, measure the voltage at the controller main power input connector.
Qualified technician handoff: stop before live electrical testing, sealed-system refrigeration work, compressor service, or protected-compartment access unless a qualified technician is handling the work.
Stop conditions- If you are not trained for live-voltage measurement, stop and hand off.
Expected: Voltage reading consistent with machine rating (approximately 115V AC).
Evidence to note: meter-reading
Tools for this route
Parts status
Exact public parts list not verified yet. Use this route to identify the system before ordering.
Candidate areas for part verification
Other Possible Issues
Switch routes if this symptom is not the closest match.