Product Not Delivered — Diagnostic Flow
Royal Vendors Royal Vendors Rvvngko
Product Not Delivered — Diagnostic Flow
Observation-first approach to determine whether the mechanical delivery system is obstructed, sensor-detected incorrectly, or motor-driven improperly.
Qualified technician handoff: stop before live electrical testing, sealed-system refrigeration work, compressor service, or protected-compartment access unless a qualified technician is handling the work.
- Mechanism jam persists after clearing visible obstructions: Stop vend testing; investigate mechanical alignment
- Motor runs but mechanism does not move at all: Stop vend cycle; check drive coupling or belt
Checklist
Guided Diagnostic Steps
Work from low-risk checks toward technician-level inspection only when evidence supports it.
You can read or print the route now. The first checkbox click opens the service contact gate.
- 1
Inspect Power Cord Visually
operator-intermediatehighExamine the full length of the power cord for cuts, kinks, discoloration, or melted areas. Check the plug prongs for damage or scorching.
Inspection LightStop conditions- Cord is cut or insulation is breached
- Plug shows scorch marks
Expected: Cord and plug are physically intact with no visible damage.
Evidence to note: photo
Tools for this route
Parts status
Exact public parts list not verified yet. Use this route to identify the system before ordering.
Candidate areas for part verification
Other Possible Issues
Switch routes if this symptom is not the closest match.