Service Issues
Savamco FM 1400 / FM 1462 Glassfront
Choose the problem first, then open the focused route for tools, safety notes, locator help, parts status, and checklist steps.
Issue Finder
What Problem Are You Seeing?
Search symptoms, filter by system, then open the matching route.
Products Warm — Compressor Not Running
This procedure determines if the cooling unit is activating correctly, checking airflow and temperature controls before investigating electrical components.
Machine Completely Dead — Power Input Diagnostic
This diagnostic verifies the entire power path, from the wall outlet back to the machine's internal components, to ensure electricity is reaching the control system.
Reduced Water Flow — Filter and Supply Diagnostic
This diagnostic traces the water path from the main supply valve through the filtration unit to the dispensing point to find any restrictions or leaks.
Delivery sensor or bin problem
Use this when delivery bin or product-detection sensor clues are present.
Payment or money acceptance problem
Money, validator, coin, bill, or card-reader clues point to this route.
Product not dispensing
Use this when the product path, tray, spiral, vend motor, or delivery path is suspect.
Machine Context
Areas This Machine May Use
Use these areas as orientation only. Open a specific issue before following diagnostic steps.