Skip to main content
Rocky Mountain Vending

Payment or money acceptance problem Review

USI 3130 Horizon Ii 3w Super Vendor 3130 Horizon Ii 3w Super Vendor

Machine type unverifiedLow confidenceExact parts not verified
Back to all issues

Payment or money acceptance problem Review

This flow guides troubleshooting through specific operational subsystems to isolate the malfunction point efficiently.

Low VoltageOperator8-12 min
Payments7 stepsoperator-intermediate
  • Any investigation into the power supply or internal circuitry must be performed by a qualified technician.
  • If the diagnostic path leads to electrical components, only a qualified technician should proceed.

Checklist

Guided Diagnostic Steps

Work from low-risk checks toward technician-level inspection only when evidence supports it.

Printable checklist

You can read or print the route now. The first checkbox click opens the service contact gate.

lead gated
  1. 1

    Check the physical integrity of the coin acceptance area.

    operator-intermediatemedium

    Check the physical integrity of the coin acceptance area.

    Stop conditions
    • Any investigation into the power supply or internal circuitry must be performed by a qualified technician.
    • If the diagnostic path leads to electrical components, only a qualified technician should proceed.

    Expected: Initial condition is documented before deeper diagnosis.

    Evidence to note: note

  2. 2

    Verify that all visible connections appear secure and undamaged.

    operator-intermediatemedium

    Verify that all visible connections appear secure and undamaged.

    Stop conditions
    • Any investigation into the power supply or internal circuitry must be performed by a qualified technician.
    • If the diagnostic path leads to electrical components, only a qualified technician should proceed.

    Expected: Initial condition is documented before deeper diagnosis.

    Evidence to note: note

  3. 3

    Execute the first diagnostic check using public-safe procedures.

    operator-intermediatemedium

    Execute the first diagnostic check using public-safe procedures.

    Stop conditions
    • Any investigation into the power supply or internal circuitry must be performed by a qualified technician.
    • If the diagnostic path leads to electrical components, only a qualified technician should proceed.

    Expected: Result is documented before continuing the route.

    Evidence to note: note

  4. 4

    Follow the guidance to test the primary dispensing mechanism.

    operator-intermediatemedium

    Follow the guidance to test the primary dispensing mechanism.

    Stop conditions
    • Any investigation into the power supply or internal circuitry must be performed by a qualified technician.
    • If the diagnostic path leads to electrical components, only a qualified technician should proceed.

    Expected: Result is documented before continuing the route.

    Evidence to note: note

  5. 5

    Record any unusual noises or resistance encountered during testing.

    operator-intermediatemedium

    Record any unusual noises or resistance encountered during testing.

    Stop conditions
    • Any investigation into the power supply or internal circuitry must be performed by a qualified technician.
    • If the diagnostic path leads to electrical components, only a qualified technician should proceed.

    Expected: Result is documented before continuing the route.

    Evidence to note: note

  6. 6

    Continue through the diagnostic steps, noting all readings.

    operator-intermediatemedium

    Continue through the diagnostic steps, noting all readings.

    Stop conditions
    • Any investigation into the power supply or internal circuitry must be performed by a qualified technician.
    • If the diagnostic path leads to electrical components, only a qualified technician should proceed.

    Expected: Result is documented before continuing the route.

    Evidence to note: note

  7. 7

    If the problem remains unresolved, cease public testing and prepare f...

    operator-intermediatemedium

    If the problem remains unresolved, cease public testing and prepare for expert handover.

    Stop conditions
    • Any investigation into the power supply or internal circuitry must be performed by a qualified technician.
    • If the diagnostic path leads to electrical components, only a qualified technician should proceed.

    Expected: Result is documented before continuing the route.

    Evidence to note: note

Tools for this route

No special tools listed

Parts status

Exact public parts list not verified yet. Use this route to identify the system before ordering.

Candidate areas for part verification

Payment componentsPower componentsController and wiring componentsDoor and lock hardware

Other Possible Issues

Switch routes if this symptom is not the closest match.

All issues
PaymentsPayment or money acceptance problem ReviewPowerNo power or dead displayControllerController or electronics problemDoor / lockDoor, latch, or lock problem