Service Issues
Vendo Vendo V18
Choose the problem first, then open the focused route for tools, safety notes, locator help, parts status, and checklist steps.
Issue Finder
What Problem Are You Seeing?
Search symptoms, filter by system, then open the matching route.
Cooling Issue — Compressor Runs But Products Warm
This diagnosis addresses cooling performance problems when the refrigeration unit appears to be running but the dispensed products are not adequately chilled.
Machine Completely Dead — Power Input Diagnostics
This procedure systematically checks for power failures, starting from the building's electrical outlet all the way to the machine's internal power connections.
Persistent Product Jam After Clearing
If products continue to jam even after initial clearing, this section helps diagnose if the issue is due to incorrect settings, worn internal parts, or product mismatch.
Display, keypad, or selection problem
Use this when the display, keypad, selections, or user controls are the main clue.
Door, latch, or lock problem
Use this when the door, latch, lock, gasket, or seal is the visible problem.
Payment or money acceptance problem
Money, validator, coin, bill, or card-reader clues point to this route.
Water Flow or Fitting Service
Use this when water taste, pressure, filters, tubing, fittings, or leaks are involved.
Machine Context
Areas This Machine May Use
Use these areas as orientation only. Open a specific issue before following diagnostic steps.