Service Issues
Savamco FM1462 Glassfront
Choose the problem first, then open the focused route for tools, safety notes, locator help, parts status, and checklist steps.
Issue Finder
What Problem Are You Seeing?
Search symptoms, filter by system, then open the matching route.
Cooling Issue – Compressor Runs But Temperature Too High
This diagnosis determines why the cabinet temperature remains elevated even though the refrigeration compressor is actively running, focusing on airflow and system loading.
Cooling Issue – Compressor Does Not Run
This investigation determines why the refrigeration compressor fails to start, checking the control signals, power delivery, and protection devices.
No Power – Internal Diagnostics
This procedure systematically investigates the entire power path within the machine when the external power source and cord are confirmed to be functioning correctly.
Vend Motor Does Not Turn
This procedure diagnoses why a specific product dispensing motor fails to operate, checking for mechanical jams, wiring continuity, and motor health.
Motor Turns But Product Does Not Dispense
This focuses on mechanical troubleshooting to determine why a product fails to drop or dispense even when the motor successfully actuates.
Multiple Vend Failures on Shared Tray or Harness
This addresses failures affecting several selections simultaneously, pointing toward common issues like shared wiring, power feeds, or tray alignment problems.
Door, latch, or lock problem
Use this when the door, latch, lock, gasket, or seal is the visible problem.
Payment or money acceptance problem
Money, validator, coin, bill, or card-reader clues point to this route.
Water Flow or Fitting Service
Use this when water taste, pressure, filters, tubing, fittings, or leaks are involved.
Machine Context
Areas This Machine May Use
Use these areas as orientation only. Open a specific issue before following diagnostic steps.