Selection Switch Failure Diagnostic
Vendo Vendo V8
Selection Switch Failure Diagnostic
Determines whether selection failure is caused by individual switches, the switch matrix harness, or the controller input.
Qualified technician handoff: stop before live electrical testing, sealed-system refrigeration work, compressor service, or protected-compartment access unless a qualified technician is handling the work.
Checklist
Guided Diagnostic Steps
Work from low-risk checks toward technician-level inspection only when evidence supports it.
You can read or print the route now. The first checkbox click opens the service contact gate.
- 1
Check input fuse or breaker
operator-intermediatetechnician-basic — must be unpluggedWith machine unplugged, locate the main fuse or circuit breaker on the machine. Visually inspect the fuse element or breaker position. If a glass fuse, check for darkened or broken element.
Expected: Fuse element is intact or breaker is in ON position.
Evidence to note: photo
Tools for this route
Parts status
Exact public parts list not verified yet. Use this route to identify the system before ordering.
Candidate areas for part verification
Other Possible Issues
Switch routes if this symptom is not the closest match.